- Aerosync 65
- Aerosync Snap/WLP-12
- Aerosync PB11
- Powerlit 30
- Aerosync PB Prime
- Line 20
- Line 10
- Aerosync PB 12
- Stylo 20K
- Powerlit 45
- Aerosync Quad
- Aerosync PB5
- Powerlit XL Lite
- Force 10K
- Powerlit Ultra Lite
- PP-124
- Stylo Pro
- Powerlit Boost
- Stylo 10K
- Powerhub 200
- Common User Manual
- Powerlit Ultra
- Stylo Max
- Aerosync PB 10
Evoke Cube+
Welcome
Thank you for purchasing the Ambrane Evoke Cube⁺ Bluetooth Speaker. We recommend you to read the instruction manual carefully before using the product.
Package Contains:
- 1 N Evoke Cube⁺ Bluetooth Speaker
- 1 N Charging Cable
- 1 N User Manual Scan Card
Product Overview:
Experience max bass in mini size with the Ambrane Evoke Cube⁺ Bluetooth speaker. Have a party anywhere, anytime with a playtime of up to 12 hours. Equipped with 40mm speaker drivers, an inbuilt mic and Bluetooth V5.1, it is time to enhance your audio and call experience.
Operating Instructions
Power ON and Pairing
- Long-press the power button for 5 seconds and the LED indicator will start flashing blue. The speaker will turn on and enter into pairing mode.
- Search for “Ambrane Evoke Cube⁺” on your device’s Bluetooth list and select to connect.
Note - Upon second use and thereafter, the speaker will automatically connect if the Bluetooth of the device is turned on.
Power OFF
- Long-press the power button for 5 seconds to turn off the speaker.
Charging Instructions
- Before using it for the first time, fully charge the device.
- Connect the provided USB cable to the Micro USB port on the speaker and the USB port on a computer or a USB adapter.
- The red LED indicator will turn on while charging.
Basic Key Operation
CHANGE BUTTONS ACCORDING TO THE BUTTONS PRESENT ON EVOKE Cube⁺
Feature |
Operation |
Play/ Pause Music |
Single press the button |
Previous Song |
Long-press the (-) button for about 1 second |
Next Song |
Long-press the (+) button for about 1 second |
Increase Volume |
Single press the ( + ) button |
Decrease Volume |
Single press the ( - ) button |
Answer/ Hang-up Phone Call |
Single press the button |
Reject Call |
Long-press the button |
Redial |
Double press the button |
Activate Voice Assistance |
Long-press the button for about 1 second |
How to switch to SD Card Mode
- To switch to SD Card Mode, single press the power button while the SD card is inserted inside the slot.
Note: Single press the power button to switch back to Bluetooth mode.
Technical Specifications
- Bluetooth Version: V5.1
- Working Distance: ≥10m
- Frequency Response: 60Hz-20kHz
- Output: 5W
- Driver Impedance: 4Ω
- Battery Capacity: 550 mAh
- Playtime: Up to 12 Hrs ( with 70% Volume )
- Charging Time: 1 Hr 30 Mins
- Multifunctional Control Buttons
- In-Built Mic
- Speaker Driver: 40mm
- SD Card Support
- Charging Type: Micro USB
Safety Hazards
WARNING
Please read these safety warnings carefully to ensure your personal safety and to prevent product damage:
Fire and Electric Shock Hazard
- Do not expose your Evoke Cube⁺ to extremely high or low temperatures.
- Do not leave your Evoke Cube⁺ in direct sunlight for extended periods of time.
- Do not leave your Evoke Cube⁺ near open flames such as cooking burners, candles, or fireplaces.
- Do not block any ventilation openings.
Battery/Charger Hazard
- Do not dispose of your Evoke Cube⁺ in the fire. The battery could explode causing severe injuries.
- Only charge the battery in accordance with the user instructions supplied with the product.
- Do not attempt to disassemble the Evoke Cube⁺ charger or force open the built-in battery because this may result in electric shock causing injury.
- Do not clean the Evoke Cube⁺ when it is being charged. Always unplug the charger first before cleaning.
Automobile Accident Hazard
- Do not leave or store the Evoke Cube⁺ or any of its accessories near or over your automobile’s airbag area because a serious injury may result when an airbag deploys.
CAUTION
- Do not use abrasive cleaners to clean your Evoke Cube⁺ because this could cause scratches and damage.
- Do not bring your Evoke Cube⁺ into contact with any sharp objects because this could cause scratches and damage.
- Do not insert anything into your Evoke Cube⁺ unless otherwise specified in the user instructions. This may damage the internal components.
- Do not attempt to repair, modify, or disassemble your Evoke Cube⁺ yourself, it does not contain any user-serviceable components.
- Do not attempt to replace your Evoke Cube⁺’s battery, it is built-in and is not changeable.
- Observe all signs and displays that require an electrical device or RF radio product to be switched in the designated area.
- Turn off your Evoke Cube⁺ prior to boarding an aircraft. Do not use Evoke Cube⁺ inside an aircraft unless allowed by your airlines.
- Dispose of the Evoke Cube⁺ and the Evoke Cube⁺'s battery in accordance with local regulations. Do not dispose of the battery with regular household waste.
Updated on 28 Sep 2023