Looking for help?
Find answers to your questions
- Stylo N20
- Loop 10
- Aerosync PB 5A
- Stylo N10
- Powerlit Duo 30
- Pocket Charge
- Aerosync Mount
- MiniCharge 20
- Force 20K
- Solar 10K
- Aerosync 65
- Aerosync Snap/WLP-12
- Aerosync PB11
- Powerlit 30
- Aerosync PB Prime
- Line 20
- Line 10
- Aerosync PB 12
- Stylo 20K
- Powerlit 45
- Aerosync Quad
- Aerosync PB5
- Powerlit XL Lite
- Force 10K
- Powerlit Ultra Lite
- PP-124
- Stylo Pro
- Powerlit Boost
- Stylo 10K
- Powerhub 200
- Common User Manual
- Powerlit Ultra
- Stylo Max
- Aerosync PB 10
MiniVac 03
Welcome
Thank you for purchasing Ambrane’s Cordless Vacuum Cleaner. We recommend you read the instruction manual carefully before using the product for maximum user experience.
Package Contains:
- 1 N Portable Vacuum Cleaner
- 4 N Product Attachments
- 1 N Charging Cable
- 1 N User Manual
How to Use:
How to Power On
Kindly press the power button at the bottom to activate the vacuum cleaner.
- Low Suction Mode: The vacuum cleaner will start in Low Suction Mode for light cleaning when you turn it on.
- High Suction Mode: Short-press the power button once to switch to High Suction Mode for more intensive cleaning.
Light Mode: Long press to turn on/off the light
How to Power Off
Press the power button again during operation to turn it off.
Note: Pause usage after 41 minutes of continuous operation and resume after a 5-minute break. However, the remaining use time is very short and you’ll need to recharge the vacuum for a stable runtime.
How to Charge
- Connect the provided USB-A to Type-C cable to a power source.
- Insert the Type-C end of the cable into the vacuum cleaner’s Type-C port, visible at the bottom.
- The vacuum cleaner will take approximately 4 to 5 hours to charge completely.
- Disconnect the cable from the vacuum cleaner once the charging is complete.
- When the battery is fully charged, the LED indicator shows green light whereas red light indicates stable or normal charge.
How to Clean
- Twist the dust bin anticlockwise to remove it and take out the HEPA combination.
- Empty the dust bin, rotate the steel mesh anticlockwise to take it off.
- Wipe the dust bin with a damp cloth, and wash the steel mesh and filter screen.
- Make sure to dry everything before reusing.
- Install the steel mesh by rotating it clockwise into the HEPA, then assemble the HEPA combination into the dust cup.
- Reattach the dust bin by twisting it clockwise until secure.
How to Utilise Accessories
- Flat Suction Nozzle: It’s suitable for cleaning doors, seats, corners, dashboards, ashtrays, and narrow or tight spots.
- Small Brush: It’s handy in suction through the flat nozzle and can sweep clean dust on surfaces such as cushions, rugs, keyboards, or air conditioning vents.
- Flexible Suction Tube: Suitable for all-around cleaning and extends reachability to hidden areas like beneath the car seat.
- Large Brush: Greatly facilitates suction in hard-to-reach corners while attached to the long suction tube and can also be used separately.
Operating Instructions & Tips
- Ensure the vacuum cleaner is fully charged before the first use. Plug the charging cable directly into the back of the unit to charge.
- Remember to empty the dust container after each use to prevent overflow.
- The HEPA combination is washable. After washing, ensure it is completely dry before reusing it to avoid motor damage.
Note: There is a buckle on the dust cup, just insert the machine in the direction of the buckle.
Product Specifications
- Motor Power: 100W (Max.)
- Rated Voltage: DC 11.1V
- Input: 5V/2A
- Max. RPM: 100000 RPM
- Battery Capacity: 2600mAh*3 (7800mAh total)
- Suction Power Levels: High (14Kpa), Low (7Kpa)
- Noise Level: < 78dB
- Battery Life: 500 hours
- Dust Box Capacity: 200ml
- Use Type: Dry debris only
- Power Cord Length: 0.8 meters
- Charging Point: Type-C
- Charging Time: Up to 4 to 5 hours
- Accessories:
- 1x Square Brush Head
- 1x Crevice Nozzle
- 1x Soft Suction Pipe
- 1x Narrow Brush
- 1x USB-A to Type-C Charging cable
Cleaning & Maintenance Instructions
- Rinse and Reassemble: The dust cup, HEPA combination, replaceable filter, and suction head are washable. After drying, reassemble in order.
- Body Care: Wipe the body with a damp cloth, avoiding the charging port. Consider replacing the filter every 6 months for optimal performance.
- Surface Cleaning: For dirt, use a neutral detergent and a dry cloth for a thorough wipe.
- Avoid Harsh Cleaners: Do not use volatile oils, thinners, alcohol, or spray cleaners to prevent damage.
- Prevent Direct Rinsing: Avoid rinsing the product directly and carefully follow specified cleaning instructions.
- Regular Dust Cup Maintenance: Clean the dust cup regularly to prevent debris buildup.
- HEPA Filter Care: Clean the HEPA filter with water, ensuring it's dry before reinstalling.
- Periodic Charging: Charge the product fully at least once every three months if unused for a long period to maintain battery health.
Troubleshooting Guide
- Insufficient Suction:
- Check the battery; recharge if necessary.
- Ensure the exhaust port is clear from obstructions.
- Automatic Shutdown Shortly After Startup:
- Charge the vacuum cleaner promptly to resolve this issue.
- Abnormal Vacuuming:
- Verify the correct installation of the dust collection bin.
- Empty the dust cup, if full.
- Clean or replace the steel mesh and HEPA filter if clogged.
Note: For unresolved problems, please contact our customer service for assistance.
Safety Instructions & Warning
- Not a Toy: This product is not intended for children. Use under adult supervision to prevent injury.
- Accidental Injury: Seek immediate medical attention in case of accidental injury.
- Avoid Liquids and Flammable Substances: Do not vacuum water, liquids, flammable materials, or uncooled ashes to prevent hazards.
- Read Carefully: Familiarize yourself with the user manual to prevent accidents.
- No Unauthorised Modifications: Do not disassemble or modify the product without authorisation.
- Avoid Extreme Conditions: Prevent exposure to fire, heat, direct sunlight, shocks, vibration, or high falls.
- Safe Charging: Use a charger that meets safety standards and matches the product's voltage marking.
- Suitability Warning: Not suitable for physically or mentally impaired individuals, children, or inexperienced users without supervision by experienced individuals.
- Damaged Unit Warning: Do not use the vacuum cleaner if it is damaged.
- Temperature Range: Operate and charge the product within the temperature range of 0°C to 40°C.
- Cable Removal After Charging: Remove the charging cable promptly after charging to avoid safety hazards.
Avoid Usage In:
- High Heat Areas: Avoid proximity to heating equipment or hot air sources.
- Steamy or Smoky Environments: Do not use near steamy areas like pools, hot springs, or kitchens.
Updated on 07 Apr 2025
What are your Feelings?
Thanks for your feedback.
- Choosing a selection results in a full page refresh.