Force 10K
Welcome
Thank you for purchasing the Ambrane Force 10K power bank. We recommend you to read the instruction manual carefully before using the product.
Package Contains:
- 1 N Force 10K Power Bank
- 1 N Charging Cable
- 1 N Rating Card
Product Overview:
Operating Instructions
How to Charge Devices with the Powerbank
- Connect your device to a USB or Type-C port of the Power Bank with a good quality charging cable.
- While connecting, LED indicators will turn ON displaying the remaining battery capacity and the fourth green LED indicator will turn ON while “fast charging” is activated.
How to Charge the Power Bank
Use a good quality USB to Type-C charging cable. Plug the Type-C connector of the cable into the Power Bank’s input port and the other connector into the matching port of a USB power adapter. The LED indicator will start flashing according to the battery status.
- Use Type-C to Type-C cable for PD charging and USB to Type-C cable for QC charging.
- We recommend using the QC/PD 20W power adapter to get an enhanced charging speed.
- While charging, the fourth green LED indicator will glow and the corresponding battery capacity indicator (White LED) will blink.
- When the fourth LED light is on, it means your power bank is charging your device quickly.
- When fully charged, all white LED indicators will turn ON and the blinking will stop.
- After the power bank is fully charged, disconnect the USB cable from the Power bank.
Charging Protocols
Supports multiple fast charge protocols like Quick Charge (QC) 2.0/3.0, Power Delivery (PD) 2.0/3.0, VOOC, WARP & DASH via USB-A & Type-C port for rapid charge of any device/smartphone.
Product Specifications
- Battery Capacity: 10000mAh
- Output: USB-A: 22.5W max.; Type-C: 20W max.
- Input: 20W max.
- Output Ports: 2 (1 Type-C, 1 USB-A)
- Rugged & Travel-Friendly Body
- Compact & Lightweight Design
- Multi-Layers of Chipset Protection
- BIS Certified
- VOOC, WARP & DASH Supported
LED Indicators
Charging the Powerbank
Connect with a suitable charging source. The indicators show the charging condition as follows:
Power Level |
LED 1 |
LED 2 |
LED 3 |
LED 4 |
|
|
WHITE |
GREEN (QC/PD) |
||||
|
0-25% |
Blinking |
OFF |
OFF |
OFF |
ON |
|
25-50% |
ON |
Blinking |
OFF |
OFF |
ON |
|
50-75% |
ON |
ON |
Blinking |
OFF |
ON |
|
75-100% |
ON |
ON |
ON |
Blinking |
ON |
|
Fully Charged |
ON |
ON |
ON |
ON |
OFF |
Charging Products with the Powerbank
Connect your device with the power bank to charge. The indicators show the discharging condition as follows:
|
Power Level |
LED 1 |
LED 2 |
LED 3 |
LED 4 |
|
|
WHITE |
GREEN (QC/PD) |
||||
|
Fully Charged |
ON |
ON |
ON |
ON |
ON |
|
75-100% |
ON |
ON |
ON |
ON |
ON |
|
50-75% |
ON |
ON |
ON |
OFF |
ON |
|
25-50% |
ON |
ON |
OFF |
OFF |
ON |
|
0-25% |
ON |
OFF |
OFF |
OFF |
ON |
|
0% |
Blinking |
OFF |
OFF |
OFF |
OFF |
PRECAUTIONS
- Some USB cables that are not compatible with the power bank or can't be used should be avoided, instead, choose or purchase the charging cable of the same mobile brand to get adequate speed.
- When the power bank can't charge digital products, please check whether the charging cable and connectors are connected properly or change the cable. After digital devices are fully charged, please unplug the charging cable timely to avoid power loss.
- Because of the high charge and discharge current, please choose good quality charging cable and connectors.
- Please make sure the power bank is fully charged when using it for the first time. Make sure that the product is fully charged at least once in two or three months.
- During charging the power bank, please unplug the cable within 30 minutes when the power bank is fully charged.
- While using output through a single port, the powerbank delivers maximum power but if dual or more ports are used at the same time, then the power bank will divide power into two or three. For Example: Power Bank maximum Current delivers 3.0A.
- In single port usage, the Power bank will operate in only one parameter whether QC or PD and will provide the output ratio mentioned.
- If all the ports are used in a single phase, then the Power Bank will work on basic parameters and the current will be divided into all the ports.
SAFETY ALERTS AND GUIDELINES
- Keep your Power bank dry and away from moisture and corrosive materials.
- Do not clean your Power bank with harsh chemicals, soaps or detergents. Just wipe it with a soft, water-dampened cloth.
- To prevent fire or shock hazards, do not expose this unit to rain or moisture.
- Do not expose this unit to extremes of temperature.
- Immediately terminate the use of the product if the item bulges, smells or leaks.
- Please recharge the Power bank once a month if not in use to extend the lifetime of the battery.
- Please allow the Power bank to deplete significantly before recharging in order to preserve the lifetime of the battery.
- Check the voltage of the USB devices and power adapters carefully before usage.
- Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the rubber finish could cause marks or staining where the product resides.
- Keep your device out of reach of small children to prevent danger.
- Lithium batteries, like all rechargeable batteries, are recyclable and should not be recycled or disposed of in normal household waste. Contact your local government for disposal or recycling practices in your area.
- Keep away from fire, water and excess temperature ( > 45°C ) and too low temperature ( <-20°C).
- Do not dismantle, crush, puncture or short circuit the power bank, or expose it to liquids, fire or an environment where the temperature is above 55°C.