- Solar 10K
- Aerosync 65
- Aerosync Snap/WLP-12
- Aerosync PB11
- Powerlit 30
- Aerosync PB Prime
- Line 20
- Line 10
- Aerosync PB 12
- Stylo 20K
- Powerlit 45
- Aerosync Quad
- Aerosync PB5
- Powerlit XL Lite
- Force 10K
- Powerlit Ultra Lite
- PP-124
- Stylo Pro
- Powerlit Boost
- Stylo 10K
- Powerhub 200
- Common User Manual
- Powerlit Ultra
- Stylo Max
- Aerosync PB 10
MiniVac 02
Welcome
Thank you for purchasing the Ambrane MiniVac-02 Portable Vacuum Cleaner. We recommend you to read the instruction manual carefully before using the product.
Package Contains:
- 1 N MiniVac-02 Portable Vacuum Cleaner
- 6 N Product Attachments
- 1 N Charging Cable
- 1 N Rating Card
Product Overview
How to Use
How to Power On
Long-press the power button for around 3 seconds to activate the vacuum cleaner.
- Low Suction Mode: The vacuum cleaner will start in Low Suction Mode for light cleaning when you turn it on.
- High Suction Mode: Short-press the power button once to switch to High Suction Mode for more intensive cleaning.
- Blower Mode: Use the same procedure as suction modes to activate the blowing option from the opposite end of the vacuum cleaner for versatile cleaning.
How to Power Off
Press the power button again during operation to turn it off.
Note: After 35 minutes of continuous use, pause and recharge before resuming.
How to Charge
- Connect the provided USB-A to Type-C cable to a power source.
- Insert the Type-C end of the cable into the vacuum cleaner’s Type-C port.
- Fully charging the vacuum cleaner will take approximately 4 hours and 15 minutes.
- On charging, the LED light will be red; once fully charged, the light changes to green.
- Disconnect the cable from the vacuum cleaner and the power source when charging is complete.
How to Clean
- Twist the dust bin anticlockwise to remove it.
- Empty the dust bin and clean the filter screen.
- Wipe the dust bin with a damp cloth, and wash the filter screen. Let both dry.
- Reattach the dust bin by twisting it clockwise until secure.
Operating Instructions & Tips
- Ensure the vacuum cleaner is fully charged before the first use. Plug the charging cable directly into the back of the unit to charge.
- Remember to empty the dust container after each use to prevent overflow.
- The HEPA filter is washable. After washing, ensure it is completely dry before reusing to avoid motor damage.
Product Specifications
- Motor Power: 80W (Max.)
- Rated Voltage: DC 7.4V
- Input: 5V/1.5A
- Max. RPM: 80000 RPM
- Battery Capacity: 2600mAh*2 (5200mAh total)
- Suction Power Levels: High (12Kpa), Low (6Kpa)
- Noise Level: < 68dB
- Battery Life: 500 hours
- Dust Box Capacity: 200ml
- Use Type: Dry debris only
- Power Cord Length: 0.8 meters
- Charging Point: Type-C
- Charging Time: Up to 4 hours and 15 minutes
- Accessories: Square brush head, round bristle brush head, short suction nozzle, long suction nozzle, flat suction nozzle, blow nozzle, charging cable
Cleaning & Maintenance Instructions
- Rinse and Reassemble: The dust cup, filter screen, replaceable filter, and suction head are washable. After drying, reassemble in order.
- Body Care: Wipe the body with a damp cloth, avoiding the charging port. Replace the filter every 3 months for optimal performance.
- Surface Cleaning: For dirt, use a neutral detergent and a dry cloth for a thorough wipe.
- Avoid Harsh Cleaners: Do not use volatile oils, thinners, alcohol, or spray cleaners to prevent damage.
- Prevent Direct Rinsing: Avoid rinsing the product directly; follow specified cleaning instructions.
- Regular Dust Cup Maintenance: Clean the dust cup regularly to prevent debris buildup.
- HEPA Filter Care: Clean the HEPA filter with water, ensuring it's dry before reinstalling.
- Periodic Charging: Charge the product fully at least once every three months if unused for a long period to maintain battery health.
Troubleshooting Guide
- Insufficient Suction:
- Check the battery; recharge if necessary.
- Ensure the exhaust port is clear from obstructions.
- Automatic Shutdown Shortly After Startup:
- Charge the vacuum promptly to resolve this issue.
- Abnormal Vacuuming:
- Verify the correct installation of the dust collection bin.
- Empty the dust cup is full.
- Clean or replace the HEPA filter if clogged.
Note: For unresolved problems, please contact our customer service for assistance.
Safety Instructions & Warning
- Not a Toy: This product is not intended for children. Use under adult supervision to prevent injury.
- Accidental Injury: Seek immediate medical attention in case of accidental injury.
- Avoid Liquids and Flammable Substances: Do not vacuum water, liquids, flammable materials, or uncooled ashes to prevent hazards.
- Read Carefully: Familiarize yourself with the user manual to prevent accidents.
- No Unauthorized Modifications: Do not disassemble or modify the product without authorization.
- Avoid Extreme Conditions: Prevent exposure to fire, heat, direct sunlight, shocks, vibration, or high falls.
- Safe Charging: Use a charger that meets safety standards and matches the product's voltage marking.
- Suitability Warning: Not suitable for physically or mentally impaired individuals, children, or inexperienced users without supervision by experienced individuals.
- Damaged Unit Warning: Do not use the vacuum cleaner if it is damaged.
- Temperature Range: Operate and charge the product within the temperature range of 0°C to 40°C.
- Cable Removal After Charging: Remove the charging cable promptly after charging to avoid safety hazards.
Avoid Usage In:
- High Heat Areas: Avoid proximity to heating equipment or hot air sources.
- Steamy or Smoky Environments: Do not use near steamy areas like pools, hot springs, or kitchens.
- Outdoor or Industrial Settings: Avoid outdoor, commercial, or industrial usage.
Updated on 16 Sep 2024