Evoke Bar 200

Welcome

Thank you for choosing Ambrane Evoke Bar 200. We strongly recommend reading this user manual carefully before using your product for the first time. It will help you get the best experience and keep your soundbar safe and long-lasting.

Package Contains

• 1 N Soundbar unit
  
  
• 1 N Subwoofer
  
  
• 1 N Wall-mounting kit
  
  

Product Overview

Operating Instructions

Power ON / OFF

• To power ON: Plug the power adapter into a wall socket, then connect it to the soundbar or subwoofer. Press the Power/Standby button on the soundbar or remote.
  
  
• To power OFF: Press the same Power/Standby button again, or turn off the wall socket.
  
  

Note: After turning on, the system may take a second or two to initialise.

Bluetooth Pairing (Wireless Mode)

1. Press the Input / Mode button on the remote or the soundbar until “BT” mode appears on the display.
   
   
2. On your device (phone, tablet, etc.), enable Bluetooth and search for “Evoke Bar 200”.
   
   
3. Select it to pair. Upon successful pairing, you will hear a confirmation tone.
   
   
4. For future use, when the soundbar is powered ON, it should connect automatically to the last paired device (if Bluetooth is ON and within range).
   
   

Wired & Other Input Modes

Remote Control Functions

Note: In some input modes (e.g. AUX, Optical), not all remote buttons may function. However, this depends on your source and digital interface as well. 

Soundbar Control Functions

EQ / Sound Modes

Evoke Bar 200 includes preset modes to suit different content:

• Movie Mode — optimised for cinema audio (enhanced surround, dialogues, etc.)
  
  
• Music Mode — flatter, perfect for songs
  
  
• News / Voice Mode — emphasises vocal clarity
  
  

Switch between Music, Movie, and News modes by pressing the corresponding buttons on the remote. The selected mode will be shown on the display.

Wall Mounting & Placement Tips

• The Evoke Bar 200 supports wall mounting. Use the included wall-mounting brackets and screws.
  
  
• Ensure the wall is strong and can bear the weight of the soundbar.
  
  
• Maintain a minimum clearance below or above (e.g. several cm) to prevent blocking of sound or ventilation.
  
  
• Use appropriate screws and anchors per wall type (concrete, drywall, etc.).
  
  
• Align the soundbar horizontally and centered relative to the TV for best sound experience.
  
  
• If mounting the subwoofer, ensure they are placed in open space, not blocked by objects or furniture.
  
  

Technical Specifications

• Speaker Type: Soundbar with SubWoofer
• Bluetooth Version: BT 5.3
• Working Distance: Up to 10 meters
• Frequency Response: 40Hz to 20kHz
• Total Output Power: 200W
• EQ Modes: 3 [Music, Movie, News]
• Speaker Type: 2.1 Channel
• Speaker Impedance: 4 Ohm
• Subwoofer Impedance: 4 Ohm
• Connectivity Options: HDMI ARC, USB, Optical, BT, AUX Input
• Control Type: Button Control & IR Remote Control
• LED Display: 3 Digit 7 Segment LED
• Mounting Type: Tabletop, Floor Standing
• Woofer Cable Length: 2.5m
• Power Cable Length: 1.5m

Important Safety Instructions

• Use this product only as described in this manual.
  
  
• Do not place the soundbar or subwoofer near direct heat sources (stoves, radiators, heating vents).
  
  
• Do not obstruct any ventilation openings.
  
  
• Do not expose the product to rain, moisture, or liquid.
  
  
• Do not insert foreign objects into any openings.
  
  
• Unplug during lightning storms or when unused for long periods.
  
  
• Handle the power cord carefully; do not crush it.
  
  
• The product contains small parts; keep them away from children.
  
  
• Do not open or disassemble the unit yourself; repair must be performed by authorized service personnel only.
  
  
• Avoid placing heavy objects on top of the soundbar.
  
  
• Use the correct voltage as specified.
  
  
• Ensure no water or moisture reaches the unit (especially the subwoofer).
  
  
• Dispose of used batteries and the product responsibly, following local regulations.
  
  

Troubleshooting / FAQs

1. The soundbar is powered on but no sound?

• Check if the correct Input / Mode is selected.
  
  
• Confirm cables (HDMI / Optical / AUX) are firmly connected.
  
  
• For Bluetooth, ensure your device’s volume is not muted, and the pairing is successful.
  
  
• Try switching to another input to isolate the issue.
  
  

1. Bluetooth won’t pair or unable to discover?

• Turn Bluetooth OFF/ON on your device.
  
  
• Forget / unpair previous entries and re-pair.
  
  
• Bring the source device closer to the soundbar (within 1–2 m).
  
  
• Ensure no interference from other electronic devices.
  
  

1. Remote not working or buttons unresponsive?

• Check and replace the remote battery.
  
  
• Ensure the remote is aimed in a straight line to the soundbar’s IR sensor (no obstruction).
  
  
• Try powering the soundbar via panel button instead.
  
  

1. Distortion or sound cuts out at high volume?

• Lower the volume a bit; the source or soundbar may be hitting its output limit.
  
  
• Avoid using excessive bass boost or EQ settings.
  
  
• Ensure the subwoofer / soundbar is not blocked or obstructed.
  
  

1. Soundbar emits a humming or noise?

• This could be due to ground loops or interference. Try changing the power socket or using a power conditioner.
  
  
• Keep audio cables away from power cables.
  
  
• Avoid placing near large appliances or heavy electrical equipment.

Warranty & Support

Your Ambrane Evoke Bar 200 comes with a 1 year warranty. This covers manufacturing defects, not damage due to misuse.

For service or support:

• Visit our official service centers.
• Contact us via phone number or email.