SliQ 3

Welcome

Thank you for purchasing the Ambrane SliQ3 Wireless Mouse. We recommend you to read the instruction manual carefully before using the product.

 Package Contains:

• 1 N SliQ3 Wireless Mouse
• 1 N Nano USB Driver
• 1 N Rating Card 

How to use:

• Open the battery cover of the mouse and put a 2×AAA battery into the battery slot. 
• Insert the USB receiver into the USB port of the computer. 
• When the corresponding indicator light flashes once, then it is ready for use.

Sleep mode

• If there is no key operation on the mouse for 1 minute, it will enter level 1 sleep mode and the decorative light will turn off. 

• To wake up the mouse, simply move it.
• Level 1 sleep mode lasts for 10 minutes 

Deep Sleep Mode

• If no activity occurs for over 10 minutes, the mouse enters deep sleep mode.
• Moving the mouse alone will not wake it up.
• To restore the mouse, press any key.

Low voltage indication

• When the voltage of the mouse drops below 3.3V, the corresponding orange indicator on the middle side flashes slowly.

Adjusting DPI 

• The DPI button allows you to adjust the sensitivity of the mouse’s pointer speed.
• Press the DPI button increase & decrease buttons located below the scroll wheel to cycle through 3 different speeds: 800-1200-1600
• DPI has a memory function, and the last DPI value set will be defaulted to the next time you use it.

Troubleshooting

If the mouse doesn’t work, try the following:

• Check if the battery of the mouse is low. If yes, please replace the battery in time.
• Check if the USB receiver is plugged into the computer’s USB port properly. If not, please try connecting to a different USB port.

If the feedback of the mouse is slow or unresponsive:

• Decrease the distance between the mouse and the connected wireless device/devices. Certain metal surfaces may interfere.

Warning

• Before using this product, please read all the instructions and warnings.
• Always keep dry.
• Do not attempt to insert foreign objects into the device.
• Do not disassemble or attempt to repair the equipment.

Note: Insert the first battery with the negative (-) side up and the positive (+) side down. For the second battery, insert the positive (+) side up and the negative (-) side down.