SliQ Glow User Manual

Welcome

Thank you for purchasing the Ambrane SliQ Glow Wireless Mouse. We recommend you to read the instruction manual carefully before using the product. 

Package Contains:

• 1 N SliQ Glow Wireless Mouse
• 1 N Nano USB Driver
• 1 N Rating Card 

Product Specifications:

• Buttons: 7
• Connectivity: 2.4GHz Wireless + BT 5.0 + BT 5.1
• DPI: 800/1200/1600 (Default: 1200)
• Input: 5V/250mA
• Operating Range: Up to 10 meters
• Charging Time: 3.5 hours
• Battery: 400mAh, Rechargeable via Type-C port 
• Weight: 87 grams
• Ergonomic Design: Ergonomic build for comfort, right hand use only
• Nano USB Receiver: Plug-and-play connectivity
• Power ON/OFF Button: Turn the mouse on and off easily.
• Compatibility: Windows XP/Vista/7/8/10/11/Mac*

*This mouse is not compatible with MacBook Air M4

How to use:

• The Mouse can connect to 3 devices simultaneously, simply short press the pairing key to switch back and forth between 2.4G/BT5.0/BT5.1 modes.
• The current working channel can be determined by the different colours displayed on the LED.
• 2.4 GHz: Green light
• BT 5.0: Orange light
• BT 5.1: Blue light
• Mouse has seven RGB backlight modes to choose from, simply short press the middle key and backward key to switch.

2.4 GHz mode

• When turned on, the mouse defaults to 2.4 GHz working mode. Simply plug the USB receiver into the computer to start using.

BT mode

• Switch to the BT mode from the bottom of the mouse, the corresponding LED indicator light will flash once and turn off. 
• Now long press the pairing key for 3 seconds, and the corresponding LED indicator light will flash quickly to enter pairing mode (pairing time is 2 minutes).
• Search for “BT 5.0 Mouse/BT 5.1”  in the device, click “pairing” to connect and you’re paired.
• After successful pairing, the corresponding LED light will stay on for 2 seconds and then turn off.

Attention

• When the mouse switches to BT mode for the first time, it directly enters pairing mode, and the corresponding LED indicator light is in a flashing state. 
• When the device is searching for the BT name, click “pairing” to connect and use it.
• If the mouse is already connected to a device in BT mode and the device has not been deleted or unpaired, when switching to BT mode, the device will automatically reconnect and can be used immediately.

Sleep mode

• If there is no key operation on the mouse for 1 minute, it will enter level 1 sleep mode and the decorative light will turn off.
• To wake up the mouse, simply move it.
• Level 1 sleep mode lasts for 10 minutes.

Deep Sleep Mode

• If no activity occurs for over 10 minutes, the mouse enters deep sleep mode.
• Moving the mouse alone will not wake it up.
• To restore the mouse, press any key.

Low voltage indication

• When the voltage of the mouse drops below 3.3V, the corresponding orange indicator on the middle side flashes slowly.

Charging the mouse

• Use a USB-Type-C data cable to connect to a computer for charging (mobile phone charger is not recommended).
• While charging, the red indicator light is on and the decorative light is off.

Adjusting DPI 

• The DPI button allows you to adjust the sensitivity of the mouse’s pointer speed.
• Press the DPI button increase & decrease buttons located below the scroll wheel to cycle through 3 different speeds: 800-1200-1600
• DPI has a memory function, and the last DPI value set will be defaulted to the next time you use it.

Additional Buttons

• The buttons located on the left side of the mouse allow you to go forward or backward while web browsing.

Troubleshooting

If the mouse doesn’t work, try the following:

• Check if the battery of the mouse is low. If yes, please charge it first. It can work simultaneously while charging.
• Check if the USB receiver is plugged into the computer’s USB port properly. If not, please try connecting to a different USB port.

If the feedback of the mouse is slow or unresponsive:

• Decrease the distance between the mouse and the connected wireless device/devices. Certain metal surfaces may interfere.

Warning

• Before using this product, please read all the instructions and warnings.
• Always keep dry.
• Do not attempt to insert foreign objects into the device.
• Do not disassemble or attempt to repair the equipment.