Charge Hub 65

Welcome

Thank you for purchasing the Ambrane Charge Hub 65 multiport extension board. We recommend you to read the instruction manual carefully before using the product.

Package Contains:

• 1 N Charge Hub 65 
• 1 N Rating Card

Product Overview

Product Specifications

• Multiport Extension Board
• GaN Technology
• Input: 110 ~ 250VAC, 50/60Hz
• Ports & Sockets: 6
  • 2 x Type-C port
  • 2 x USB-A ports
  • 2 x AC sockets
• Output:
  • Type-C1: 65W max
  • PPS: 63W max
  • Type-C2: 63W max
  • USB-A1/A2: 22.5W max
  • AC Socket: 2500W max
• Maximum Output:
  • AC: 2500W
  • DC: 65W
• Safety Features: Short Circuit Protection, Surge Protection
• Compatibility: Compatible with all mobile phones and electrical gadgets
• Cable Length: 1.34 m
• Weight: 349 gms

Port Combination

Refer to the table below to understand port combinations and maximum wattage distribution under various scenarios:

Important Safety Instructions

• Before use, carefully read and follow all instructions and warnings provided in this manual.
• Do not overload the power strip by exceeding the maximum power limit (2500W).
• Avoid using the extension board in wet or damp environments to prevent electrical hazards.
• Unplug the charger when not in use or during thunderstorms to avoid damage due to power surges. 

How to Setup

• Place the charger in a convenient location close to the power outlet.
• Ensure the power switch on the extension board is turned off.
• Plug the 1.34 m power cable into a suitable wall socket.
• Press the power switch to turn on the charger. 

How to Use

• To power your devices, plug them into the available power ports on the charger.
• For USB-powered devices, utilise the dedicated USB-A ports provided.
• Ensure the total power consumption of connected devices does not exceed 2500W.
• Use the single switch to turn the charger on or off conveniently.

Troubleshooting

• In case of a power surge or short circuit, the charger is designed to provide protection. Unplug devices and reset the charger by switching it off, waiting a few seconds, and then turning it back on.
• If you notice any damage, discontinue use immediately and contact customer support for assistance.

Maintenance

• Regularly inspect the charger and cable for any signs of wear or damage. If found, discontinue use and replace the product.
• Keep the charger clean and free from dust and debris.
• Avoid bending or twisting the cable excessively to prevent damage to the wires.

Disclaimer: This power strip is intended for household use and compatible devices as mentioned in the specifications. It is not suitable for heavy-duty industrial applications.

Any misuse of the power strip that leads to damage or injury is not the responsibility of the manufacturer.