Looking for help?

Find answers to your questions

SmartStrip Auto

Welcome

Thank you for purchasing the Ambrane SmartStrip Auto car extension board. We recommend you to read the instruction manual carefully before using the product.

Package Contains:

  • 1 N SmartStrip Auto
  • 1 N Rating Card

Product Overview

Product Specifications:

  • 200W Car Extension Board
  • Ports & Sockets: 5
    • 1 x Type-C port
    • 2 x USB-A ports
    • 2 x AC sockets
  • Maximum Output: 200W
  • Input: DC12V~16V*
  • Output:
    • Type-C: 30W
    • PPS: 33W
    • USB-A: 20W
    • VOOC: 22.5W
    • AC Socket: 140W max
  • Safety Features: Short Circuit Protection, Surge Protection
  • Compatibility:
    • Vehicles: Compatible with all vehicles’ cigarette lighter port
    • Devices: Compatible with Android Phones, iPhones, Laptops,Headphones, Tablets, Cellular Phones, etc.
  • Cable Length: 420 mm
  • Voltage Indicator: Digital Display
  • Weight: 269gms

*The product input operating voltage ranges 12 to 16VDC.

How to Setup

  • Place the power strip in a convenient location close to the cigarette port.
  • Ensure the power switch on the extension board is turned off.
  • Once the car starts, plug in the power cable into the compatible cigarette port and press the power switch to turn it on.
  • The digital display on the strip will indicate that the power strip is ready for use.

How to Use

  • To power your devices, plug them into the available power ports on the strip.
  • Once the strip is plugged into the cigarette lighter port, the USB ports are ready for use. 
  • To activate the AC sockets, simply press the button on the extension board

Precautions

  • Avoid using the power strip for an extended period after turning off the car engine, as this can lead to a significant power drain, which may affect the car's ignition and shorten the battery's lifespan.
  • Before use, ensure that the total power consumption of connected devices does not exceed the output power of the strip, i.e., 200W. 
  • Keep away from children due to safety reasons.

Troubleshooting

  • In case of a power surge or short circuit, the power strip is designed to provide protection. Unplug devices and reset the strip by switching it off, waiting a few seconds, and then turning it back on.
  • If the digital display fails to illuminate or if you notice any damage, discontinue use immediately and contact customer support for assistance.
  • When the digital screen displays an error code (such as E1, E2, etc.) , it indicates that the system has detected an issue. Please refer to the solutions below for each corresponding error code:

Error Code 

Root Cause

Troubleshooting

E1

Input Under-Voltage Protection

The car battery voltage is too low & needs to be stopped. Check the Car battery or replace the battery.

E2

Input Over-Voltage Protection

The voltage of the car battery is too high and it needs to be stopped.

.Check whether the car battery is abnormal.

E3

Output Overload Protection

The inverter output power is too High and needs to be stopped or

the load power needs to be reduced

E4

Output Short-Circuit Protection

Indicates that the output is short-circuit protected and needs to be stopped to check whether the device is damaged.

E5

Input Over-Temperature Protection

The inverter temperature is too high.It needs to be stopped or reduce the 

output power and check whether the fan is working normal

E6

Output Over-Temperature Protection

The inverter temperature is too high.It needs to be stopped or

reduce the output power and check whether the fan is normal.

Maintenance 

  • Regularly inspect the power strip and cable for any signs of wear or damage. If found, discontinue use and replace the power strip.
  • Keep the power strip clean and free from dust and debris.
  • Avoid bending or twisting the cable excessively to prevent damage to the wires.
  • Unplug the power strip properly and keep it in a suitable place after every use.
  • Do not use the power strip in a humid environment.
  • To ensure good ventilation, do not insert foreign objects into the vent.
  • Minimise dropping or bumping the product on hard surfaces.

Disclaimer: This power strip is intended for car use and compatible devices as mentioned in the specifications. It is not suitable for heavy-duty industrial applications.

Any misuse of the power strip that leads to damage or injury is not the responsibility of the manufacturer.

Updated on 24 Jul 2025