RAAP H100 Product Details

Welcome

Thank you for purchasing the RAAP H100 GaN Charger. We recommend you to read the instruction manual carefully before using the product.

Package Contains:

• 1 N RAAP H100 GaN Charger
• 1 N Rating Card

Product Overview

Product Introduction

Charge up the GaN way with the RAAP H100 ultra-fast GaN charger! It comes with an ultra 100W BoostedSpeed™ to give you an exhilarating charging speed. Enabled with 4 fast-charging ports, you can charge all your favourite Type-C & USB-A enabled gadgets efficiently. This charger is extremely portable and comes with a detachable plug supporting both US and Indian pins, making it universally compatible and a perfect travel companion for your travel trips. Plus, it carries the capability of charging your Type-C enabled laptops.

Product Specifications

• 4-in-1 100W Fast Charger
• GaNMAX Technology
• Convertible Pins
• Input: AC 110-240V/ 50/60Hz, 2.5A
• Output: C1/C2: 5V ~15V/3A, 20V/ 5A (100W Max), C3: 5V/3A, 9V/2/22A, 12V/1.67A (20W Max), A1: 5V/3A, 9V/2A. 12V/1.5A (18W)
• Ports: 3 Type-C PD Ports + 1 USB A Port 
• Laptop Charging through C1 & C2 port 
• Protocol Supported: QC 3.0&QC 2.0, PD 3.0&PD 2.0, PPS, AFC/FCP/SCP/DCP1.5A/APPLE2.4A
• Multi-layers of Chipset Protection
• Weight: 200 gms
• Dimensions: 6.3 × 6.3 × 3.05 cm
• BIS Certified

Using the Product to Charge Devices

How to Charge Type-C Laptops with the Charger

• Use a good quality Type-C to Type-C charging cable that supports laptop charging.
• Plug one end of the Type-C to Type-C cable into the charger’s Type-C port and the other end into the Type-C port of your laptop.
• Your laptop will start getting charged.

Port Combination

Refer to the image below to understand port combinations and maximum wattage distribution under various scenarios:

Dual Pins Instructions

This charger has Indian Pins by default.

Slide the detachable plug upwards to use the US/EU Pins.

Important Notice

To ensure the safety and optimal performance of your RAAP H100 GaN Charger, please follow these guidelines:

• Avoid Disassembly or Modification: Do not attempt to disassemble or modify the charger. Unauthorised modifications can lead to product damage and safety hazards.

• Prevent Exposure to Moisture and Fire: Keep the charger away from moisture, water, or open flames to prevent short circuits or current leakage.

• Optimal Storage Conditions: Store the charger in a dry, non-humid, and non-corrosive environment to prolong its lifespan.

• Temperature Range: Operate the charger within a temperature range of -23°C to 40°C (-10°F to 104°F). Extreme temperatures can affect performance.

• Handle with Care: Avoid rough handling, throwing, trampling, or impact. Treat the charger gently to prevent damage.

• Disconnect After Use: Always unplug the charger from the power source when it is not in use or after completing the charging process.

• Child Safety: Keep the charger out of reach of children to prevent accidents or mishandling.
• Use Appropriate Cables: Only use compatible, high-quality cables designed to charge with the charger. Avoid using cables of doubtful quality to prevent accidents and damage to your devices.

Warning

• Never attempt to use the RAAP H100 GaN Charger if you notice any visible damage, exposed wires, or unusual odours. Contact our customer support immediately.
• Do not use the RAAP H100 GaN Charger in environments with excessive dust, heat, or direct sunlight.
• If the RAAP H100 GaN Charger becomes excessively hot during use, disconnect it from the power source and allow it to cool before further use.
• In case of overheating, unusual noise, or any unexpected behaviour, discontinue use and contact our customer support.
• The RAAP H100 GaN Charger is intended for indoor use only. Avoid using it outdoors or in environments where it may be exposed to extreme conditions.
• Do not attempt to charge incompatible devices or devices that exceed the charger's specified wattage. Doing so may result in damage.